A product photograph helps identify a plastic spool, but it does not replace a dimensional drawing or agreed purchase specification. Changhui, a wire reel manufacturer, uses the black product image marked “355mm mesh plastic spool” and “PP/ABS” to explain the information worth confirming before ordering.
The image shows a black body, mesh-style flanges and a central bore. The 355mm marking identifies the illustrated model; it does not establish the bore, barrel diameter, winding width or overall width. Supply a machine drawing or measurements of the existing spool and confirm each dimension and tolerance. A matching model label alone is not evidence of interchangeability.
The source image says PP/ABS. This article preserves that label without interpreting it as a blend or promising that identical material options are available for every order. Agree the actual material and any environmental requirements in writing during quotation and order confirmation. If material documentation is required, specify the type of document in advance.
Provide the machine shaft diameter, clamping method, available installation width and basic information about the wire to be wound. Similar-looking flanges do not demonstrate machine compatibility. Check the bore and locating surfaces against a drawing or sample. Load, speed and winding tension require separate confirmation; neither load capacity nor high-speed suitability can be inferred from the mesh appearance.
On receiving a sample, record the condition of flange edges, the bore and connection areas. Look for obvious cracks, missing sections or deformation, then compare measured dimensions with the agreed drawing. Discuss anything that may affect mounting or wire contact before use. Do not modify the bore to resolve an unexplained mismatch; any machine trial must follow the equipment instructions and site safety procedures.
When asking Changhui about the 355mm black mesh plastic spool, send the identifying image, quantity, critical dimensions, explicit material requirement and machine interface conditions together. Use photographs to identify the style and agreed documents to define acceptance criteria. Further product information and contact options are available on the Changhui wire reel website, www.chxpgd.com.
